My Notes

Recently I have configured hardware mirroring in T3-2 server.The entire putty log is published.After Raid volume creation we should label it by booting into single user mode from the DVD media otherwise installation software will exit saying hardware failure or unformatted hard disk.

{0} ok probe-scsi-all

/pci@400/pci@2/pci@0/pci@e/scsi@0

FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00

Target 9

Unit 0 Disk HITACHI H103030SCSUN300G A2A8 585937500 Blocks, 300 GB

SASDeviceName 5000cca01535a7a4 SASAddress 5000cca01535a7a5 PhyNum 0

Target a

Unit 0 Removable Read Only device TEAC DV-W28SS-R 1.0C

SATA device PhyNum 7

Target b

Unit 0 Disk HITACHI H103030SCSUN300G A2A8 585937500 Blocks, 300 GB

SASDeviceName 5000cca01535be70 SASAddress 5000cca01535be71 PhyNum 1

/pci@400/pci@1/pci@0/pci@b/pci@0/usb@0,2/hub@2/hub@3/storage@2

Unit 0 Removable Read Only device AMI Virtual CDROM 1.00

{0} ok devalias

screen /pci@400/pci@1/pci@0/pci@0/pci@0/display@0

mouse /pci@400/pci@1/pci@0/pci@b/pci@0/usb@0,2/hub@2/device@4/mouse@1

igb3 /virtual-devices@100/channel-devices@200/network@3

igb2 /virtual-devices@100/channel-devices@200/network@2

igb1 /virtual-devices@100/channel-devices@200/network@1

igb0 /virtual-devices@100/channel-devices@200/network@0

primary-cdrom /virtual-devices@100/channel-devices@200/virtual-disk-server@1

primary-vds0 /virtual-devices@100/channel-devices@200/virtual-disk-server@0

primary-vsw3 /virtual-devices@100/channel-devices@200/virtual-network-switch@3

primary-vsw2 /virtual-devices@100/channel-devices@200/virtual-network-switch@2

primary-vsw1 /virtual-devices@100/channel-devices@200/virtual-network-switch@1

primary-vsw0 /virtual-devices@100/channel-devices@200/virtual-network-switch@0

primary-vcc /virtual-devices@100/channel-devices@200/virtual-console-concentrator@0

net3 /pci@500/pci@1/pci@0/pci@5/network@0,1

net2 /pci@500/pci@1/pci@0/pci@5/network@0

dvd /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p7

disk5 /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p5

disk4 /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p4

disk3 /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p3

disk2 /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p2

disk1 /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p1

disk0 /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p0

disk /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p0

scsi0 /pci@400/pci@2/pci@0/pci@e/scsi@0

scsi /pci@400/pci@2/pci@0/pci@e/scsi@0

rcdrom /pci@400/pci@1/pci@0/pci@b/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0

rkeyboard /pci@400/pci@1/pci@0/pci@b/pci@0/usb@0,2/hub@2/device@4/keyboard@0

rscreen /pci@400/pci@1/pci@0/pci@0/pci@0/display@0:r1280x1024x60

net1 /pci@400/pci@1/pci@0/pci@4/network@0,1

net0 /pci@400/pci@1/pci@0/pci@4/network@0

net /pci@400/pci@1/pci@0/pci@4/network@0

virtual-console /virtual-devices@100/console@1

name aliases

{0} ok select scsi

{0} ok show-children

FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00

Target 9

Unit 0 Disk HITACHI H103030SCSUN300G A2A8 585937500 Blocks, 300 GB

SASDeviceName 5000cca01535a7a4 SASAddress 5000cca01535a7a5 PhyNum 0

Target a

Unit 0 Removable Read Only device TEAC DV-W28SS-R 1.0C

SATA device PhyNum 7

Target b

Unit 0 Disk HITACHI H103030SCSUN300G A2A8 585937500 Blocks, 300 GB

SASDeviceName 5000cca01535be70 SASAddress 5000cca01535be71 PhyNum 1

{0} ok 9 b create-raid1-volume

Target 9 size is 583983104 Blocks, 298 GB

Target b size is 583983104 Blocks, 298 GB

The volume can be any size from 1 MB to 285148 MB

What size do you want? [285148 ]

Volume size will be 583983104 Blocks, 298 GB

Enter a volume name: [0 to 15 characters] raidvol0 0

Volume has been created

{0} ok show-children

FCode Version 1.00.54, MPT Version 2.00, Firmware Version 5.00.17.00

Target a

Unit 0 Removable Read Only device TEAC DV-W28SS-R 1.0C

SATA device PhyNum 7

Target 389 Volume 0

Unit 0 Disk LSI Logical Volume 3000 583983104 Blocks, 298 GB

VolumeDeviceName 3410ff9cf8297976 VolumeWWID 0410ff9cf8297976

{0} ok show-volumes

Volume 0 Target 389 Type RAID1 (Mirroring)

Name raidvol0 WWID 0410ff9cf8297976

Optimal Enabled Background Init In Progress

2 Members 583983104 Blocks, 298 GB

Disk 1

Primary Optimal

Target 9 HITACHI H103030SCSUN300G A2A8

Disk 0

Secondary Optimal

Target b HITACHI H103030SCSUN300G A2A8

{0} ok reset-all

SPARC T3-2, No Keyboard

OpenBoot 4.32.4, 8192 MB memory available, Serial #96146534.

Ethernet address 0:21:28:bb:14:66, Host ID: 85bb1466.

Boot into single user mode from dvd then label the raid1 volume visible to the OS then restart and continue with OS installation as usual.

{0} ok boot dvd -s => to label the volume.

Boot device: /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@p7 File and args: -s

|/-\|/-\|/-\|/-

SunOS Release 5.10 Version Generic_142909-17 64-bit

\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Booting to milestone "milestone/single-user:default".

|/Configuring devices.

-\|/-\|/-\WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0 (sd1):

Corrupt label; wrong magic number

/pci@400/pci@2/pci@0/pci@e/scsi@0 (mpt_sas0):

send_sep act 0: ioc status:8001|/-\|/Using RPC Bootparams for network configuration information.

Attempting to configure interface igb3...

-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Skipped interface igb3

Attempting to configure interface igb2...

-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Skipped interface igb2

Attempting to configure interface igb1...

-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Skipped interface igb1

Attempting to configure interface igb0...

-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/Skipped interface igb0

-\|/USB keyboard

Requesting System Maintenance Mode

SINGLE USER MODE

# format

Searching for disks...WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0 (sd1):

Corrupt label; wrong magic number

WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0 (sd1):

Corrupt label; wrong magic number

done

c2t38396A4077C6969Ad0: configured with capacity of 277.99GB

AVAILABLE DISK SELECTIONS:

0. c2t38396A4077C6969Ad0 <LSI-LogicalVolume-3000 cyl 65533 alt 2 hd 64 sec 139>

/pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0

Specify disk (enter its number): 0

selecting c2t38396A4077C6969Ad0

[disk formatted]

WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0 (sd1):

Corrupt label; wrong magic number

Disk not labeled. Label it now? yes

WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0 (sd1):

Corrupt label; wrong magic number

WARNING: /pci@400/pci@2/pci@0/pci@e/scsi@0/iport@v0/disk@w38396a4077c6969a,0 (sd1):

Corrupt label; wrong magic number

FORMAT MENU:

disk - select a disk

type - select (define) a disk type

partition - select (define) a partition table

current - describe the current disk

format - format and analyze the disk

repair - repair a defective sector

label - write label to the disk

analyze - surface analysis

defect - defect list management

backup - search for backup labels

verify - read and display labels

save - save new disk/partition definitions

inquiry - show vendor, product and revision

volname - set 8-character volume name

!<cmd> - execute <cmd>, then return

quit

format> p

PARTITION MENU:

0 - change `0' partition

1 - change `1' partition

2 - change `2' partition

3 - change `3' partition

4 - change `4' partition

5 - change `5' partition

6 - change `6' partition

7 - change `7' partition

select - select a predefined table

modify - modify a predefined partition table

name - name the current table

print - display the current table

label - write partition map and label to the disk

!<cmd> - execute <cmd>, then return

quit

partition> p

Current partition table (default):

Total disk cylinders available: 65533 + 2 (reserved cylinders)

Part Tag Flag Cylinders Size Blocks

0 root wm 0 0 (0/0/0) 0

1 swap wu 0 0 (0/0/0) 0

2 backup wu 0 - 65532 277.99GB (65533/0/0) 582981568

3 unassigned wm 0 0 (0/0/0) 0

4 unassigned wm 0 0 (0/0/0) 0

5 unassigned wm 0 0 (0/0/0) 0

6 usr wm 0 - 65532 277.99GB (65533/0/0) 582981568

7 unassigned wm 0 0 (0/0/0) 0

partition> q q

FORMAT MENU:

disk - select a disk

type - select (define) a disk type

partition - select (define) a partition table

current - describe the current disk

format - format and analyze the disk

repair - repair a defective sector

label - write label to the disk

analyze - surface analysis

defect - defect list management

backup - search for backup labels

verify - read and display labels

save - save new disk/partition definitions

inquiry - show vendor, product and revision

volname - set 8-character volume name

!<cmd> - execute <cmd>, then return

quit

format> q

# init 0

# syncing file systems... done

Program terminated

SPARC T3-2, No Keyboard

OpenBoot 4.32.4, 130560 MB memory available, Serial #95507068.

Ethernet address 0:21:28:b1:52:7c, Host ID: 85b1527c.

{0} ok boot dvd => Now install OS as usual

My Notes

Thursday, 26 April 2012

No comments:

Post a Comment

Kubernetes cluster setup on Ubuntu 26.04 using Kubeadm

Search This Blog